- There are no more items in your cart
- Shipping
- Total €0.00
- BRITISH RACER PARTS
- RUMBLER project ← 2015
- RUMBLER project 2016 →
- LIGHTING
- ELECTRICAL PARTS
- IGNITION
- SPEEDOMETERS AND INSTRUMENTS
- HANDLEBARS
- FORK
- SHOCK ABSORBERS
- CONTROLS
- BRAKES
- WHEELS
- BODYWORK
- SEATS
- TANK
- EXHAUST
- POWER
- ENGINE
- CLUTCH
- SPROCKETS CHAINS AND PULLEYS
- CRANKCASE & VALVE COVER
- GASKETS
- HARDWARE
- WORKSHOP, GARAGE AND TOOLS
- OILS AND OTHER CHEMICAL PRODUCTS
- TRIUMPH CLASSIC PARTS
- TRIUMPH CLASSIC ← 2015
- RUMBLER project ← 2015
- LIGHTING
- ELECTRICAL PARTS
- IGNITION
- SPEEDOMETERS AND INSTRUMENTS
- HANDLEBARS
- FORK
- SHOCK ABSORBERS
- CONTROLS
- BRAKES
- WHEELS
- BODYWORK
- SEATS
- TANK
- EXHAUST
- CARBURETOR AND INJECTION
- ENGINE
- CLUTCH
- SPROCKETS CHAINS AND PULLEYS
- CRANKCASE & VALVE COVER
- GASKETS
- HARDWARE
- OWNER'S HANDBOOK
- WORKSHOP, GARAGE AND TOOLS
- OILS AND OTHER CHEMICAL PRODUCTS
- TRIUMPH CLASSIC 2016 →
- TRIUMPH CLASSIC ← 2015
- TRIUMPH GENUINE PARTS
- ROYAL ENFIELD PARTS
- CONTINENTAL GT 650
- INTERCEPTOR 650
- SUPER METEOR 650
- METEOR 350
- HNTR 350
- CLASSIC 350
- SCRAM 411
- HIMALAYAN 400/450
- APPAREL AND HELMETS
- ACCESSORIES
- OUTLET
mini handlebar switch
Switch
Beautiful handcrafted switch, machined aluminum. Ideal for a neat look. It is ideal for eliminating ugly original switches. These mini switches have a contoured base designed to line up with either 22 mm/7/8" or 25.4 mm/1" handlebars. The measurements of the aluminum body are, length 41 mm, width 18 mm, height 11 mm.
You can install 1 or more switches for each handlebar.
Easy to install, requires 2 holes, a 15 mm diameter hole for the rocker switch and a 9 mm diameter hole for the push button switch.
Note: Requires a 3.3 mm M4 threaded hole to create the recess for the supplied screw that secures the switch to the handlebars. All wiring associated with the switch can be routed inside the handlebars to your desired exit point.
Button is momentary "push-in" type (active only while pressed), lever is "on/off/on" type.
The switch can handle up to about 4 amps, if you want to control devices with higher current, such as headlights, the switch must be paired with a relay to work.
Ideal for custom applications.
Made in Japan!
No customer reviews for the moment.